SOLAR GENERATOR TRAILER UNI-T10 P

The UNI-T10 P is a towable solar generator station with a 5kW solar array, 32.1kWh LiFePO4 storage and a 6kW inverter, recharging in just 6.1 hours of peak sun for fast, silent, fuel-free site power.

1. 5kW solar array — 25% more solar capacity than comparable 32kWh units

2. Fast 6.1-hour peak-sun recharge via 100A MPPT controller with remote monitoring

3. 32.1kWh LiFePO4 battery with heater for reliable cold-climate operation and a 10+ year design life

4. 6kW / 6kVA single-phase 230V inverter with 32A + 2 × 15A MCB-protected outputs

5. Zero-noise, zero-emission operation — no engine, no fuel, no exhaust

6. AU ADR compliant double-axle trailer with 4 outriggers, towable behind a standard vehicle

7. Up to 4.8 hours runtime at full 6kW load

Key Features

High-Output 5kW Solar Array — 10 × 500W monocrystalline panels on a hydraulic lifting roof generate more power and recharge 25% faster than comparable units.

100A MPPT Fast Charging — the 100A MPPT controller with remote monitoring delivers a full 32.1kWh recharge in about 6.1 hours of peak sun.

Safe LFP Battery with Heater — 32.1kWh LiFePO4 pack with integrated heater for cold-climate reliability and a 10+ year design life.

MCB-Protected Power Output — 32A and 15A sockets with MCB protection deliver clean 230V single-phase power to tools, lighting and equipment.

Silent Fuel-Free Operation — with no engine in the standard configuration, the unit runs quietly on sunlight alone.

Road-Legal AU ADR Trailer — double-axle chassis with ball hitch, 4 outriggers and fork pockets for easy towing, levelling and transport.

Advantages

Faster Payback on Sun — 5kW harvesting cuts recharge time to 6.1 hours, maximizing usable power per day.

Zero Fuel Cost — standard configuration runs entirely on solar; no diesel, no refuelling, no running fuel bills.

Instant Deployment — hydraulic array lift and outriggers get the unit generating within minutes of arrival.

Low Maintenance — no engine to service; LFP chemistry with a 10+ year design life.

Built for Australian Conditions — AU ADR compliant trailer and 230V single-phase output for the AU/NZ market.

Fully Monitorable — remote monitoring keeps generation and battery status visible from any device.

Applications

Construction sites — tools, site offices, lighting, pumps and small plant where grid power is unavailable

Off-grid and remote worksites — survey camps, telecom shelters, environmental and mining exploration bases

Events and venues — lighting, sound, catering and temporary stall power for outdoor events

Emergency backup — rapid-deploy power for businesses, community facilities and storm response

Rural properties and farms — water pumps, electric fencing, sheds, workshops and outbuildings

Power rental fleets — a silent, fuel-free unit that hire companies can deploy and monitor remotely

FAQ

Q1: How long does it take to recharge?

A: About 6.1 hours of peak sun via the 5kW array and 100A MPPT controller; a 32A input plug also allows grid or generator top-up.

Q2: How is it different from the UNI-T8 P?

A: It carries a larger 5kW solar array and a 100A MPPT controller, recharging about 20% faster than the 4kW UNI-T8 P.

Q3: How long can it run?

A: Up to 4.8 hours continuously at full 6kW load, and longer at lower loads.

Q4: Is it noisy?

A: The standard configuration has no engine — it runs silently on solar. An optional backup genset is available as an upgrade.

Q5: Can it operate in cold weather?

A: Yes — the LiFePO4 battery has an integrated heater for reliable cold-climate charging.

Q6: What is the trailer standard?

A: AU ADR compliant double-axle trailer, 2" ball hitch, 4 outriggers and fork pockets; 1800 kg.

Q7: How is it shipped?

A: 2 units per 20ft container, 4 units per 40ft container (CBU).